ferrite chip bead ? z3 series note: specifications subject to change w ithout notice. please check our we bsite for latest information. proprietary and confidential document of superworld 19/09/2017 p1 1. part no. expression: z 3 k 3 0 0 - r f ? (a) series code (e) r: reel (a)(b) (c) (d) (e) (f) (g) (b) dimension code (f) current code: f=600ma (c) material code (g) 10: standard (d) impedance code 11-99: internal controlled code 2. configuration & dimensions: unit : mm 3. schematic: 4. material list: a b c d g h l 2.00 0.20 1.25 0.20 0.85 0.20 0.50 0.30 1.00 ref. 1.45 ref. 3.10 ref.
ferrite chip bead ? z3 series note: specifications subject to change w ithout notice. please check our we bsite for latest information. proprietary and confidential document of superworld 19/09/2017 p2 5. general specification: (a) operating temp. : -40c to +125c (b) storage temp. : -40c to +125c (c) temperature rise: 20c max. at rated current (d) humidity range: 85 2% rh (e) storage condition (component in its packaging) i) temperature: 40c or less ii) humidity : 60% rh or less 6. electrical characteristics: part number impedance ( ? ) test frequency (mhz) dcr ( ? ) max. rated current (ma) max. z3k110-ri-10 11 25% 100 0.10 900 Z3K170-RF-10 17 25% 100 0.10 600 z3k260-rf-10 26 25% 100 0.10 600 z3k300-rf-10 30 25% 100 0.10 600 z3k400-rf-10 40 25% 100 0.10 600 z3k600-ri-10 60 25% 100 0.10 900 z3k121-rh-10 120 25% 100 0.20 800 z3k151-rh-10 150 25% 100 0.20 800 z3k221-rh-10 220 25% 100 0.30 750 z3k301-rg-10 300 25% 100 0.30 700 z3k471-rg-10 470 25% 100 0.35 700 z3k601-re-10 600 25% 100 0.40 500 z3k102-rd-10 1000 25% 100 0.45 400 z3h102-rd-10 1000 25% 100 0.45 400 z3h152-rd-10 1500 25% 100 0.50 350 z3h202-rc-10 2000 25% 100 0.60 250 z3n070-rf-10 7 25% 100 0.10 600 z3c121-rg-10 120 25% 100 0.25 600 z3c221-rd-10 220 25% 100 0.30 400 z3c301-rd-10 300 25% 100 0.35 400
ferrite chip bead ? z3 series note: specifications subject to change w ithout notice. please check our we bsite for latest information. proprietary and confidential document of superworld 19/09/2017 p3 7. characteristics curve: z3k110-ri-10 Z3K170-RF-10 z3k260-rf-10 z3k300-rf-10 z3k400-rf-10 z3k600-ri-10
ferrite chip bead ? z3 series note: specifications subject to change w ithout notice. please check our we bsite for latest information. proprietary and confidential document of superworld 19/09/2017 p4 z3k221-rh-10 z3k301-rg-10 z3k121-rh-10 z3k151-rh-10 z3k471-rg-10 z3k601-re-10
ferrite chip bead ? z3 series note: specifications subject to change w ithout notice. please check our we bsite for latest information. proprietary and confidential document of superworld 19/09/2017 p5 z3k102-rd-10 z3h102-rd-10 z3h152-rd-10 z3h202-rc-10 z3n070-rf-10 z3c121-rg-10
ferrite chip bead ? z3 series note: specifications subject to change w ithout notice. please check our we bsite for latest information. proprietary and confidential document of superworld 19/09/2017 p6 8. soldering: mildly activated rosin fluxes are preferred. our te rminations are suitable for all re -flow soldering systems. if hand soldering cannot be avoided, the preferred technique is the utilization of hot air soldering tools. note: if wave soldering is used, there will be some risk reflow soldering temperatures below 240 c, there will be non-wetting risk 8-1 solder re-flow: recommended temperature profiles for re-flow soldering in figure 1. 8-2 soldering iron (figure 2): products attachment with soldering iron is discouraged due to the inherent process control limitations. in the event that a soldering iron must be employed the following precautions are recommended. note : a) preheat circuit and products to 150c. b) 350c tip temperature (max.) c) never contact the ceramic with the iron tip d) 1.0mm tip diameter (max.) e) use a 20 watt soldering iron with tip diameter of 1.0mm f) limit soldering time to 4~5 secs. z3c221-rd-10 z3c301-rd-10
ferrite chip bead ? z3 series note: specifications subject to change w ithout notice. please check our we bsite for latest information. proprietary and confidential document of superworld 19/09/2017 p7 8-3 soldering volume: by increasing the solder volume, the mechanical stress to product is also increased. exceeding solder volume may cause the faiure of mechanical or electrical performa nce. solder shall be used not to be exceed as shown in figure 3. minimum fillet height = soldering thickness +25% product height 9. packaging information: 9-1 reel dimension a(mm) b(mm) c(mm) d(mm) 9.00.5 60.02.0 13.50.5 178.02.0
ferrite chip bead ? z3 series note: specifications subject to change w ithout notice. please check our we bsite for latest information. proprietary and confidential document of superworld 19/09/2017 p8 9-2 tape dimension material of taping is paper 9-3 packaging quantity chip size z3 chip/reel 4000 9-4 tearing off force size bo(mm) ao(mm) ko(mm) p(mm) t(mm) z3 2.100.05 1.300.05 0.950. 05 4.000.10 0.950.05 the force for tearing off cover tape is 15 to 60 grams in the arrow direction under the following conditions. room temp. (c) room humidity (%) room atm (hpa) tearing speed mm/min 5~35 45~85 860~1060 300
ferrite chip bead ? z3 series note: specifications subject to change w ithout notice. please check our we bsite for latest information. proprietary and confidential document of superworld 19/09/2017 p9 application notice: 1. storage conditions: to maintain the solderability of terminal electrodes: a) recommended products should be used wi thin 12 months from the time of delivery. b) the packaging material should be kept wh ere no chlorine or sulfur exists in the air. 2. transportation: a) products should be handled with care to avoi d damage or contamination from perspiration and skin oils. b) vacuum pick up is strongly recommended for individual components. c) bulk handling should ensure that abrasion and mechanical shock are minimized
|
